When it comes to warehouse lighting design,there are lots of things to consider. There are various warehouse lighting standards, as well as a myriad of warehouse lighting design choices to choose between. Besides the necessary safety guidelines, what are some of the better tips on lighting the warehouse in the best, most practical and comfortable way? Let’s go over some of the best tips you might know so that you can prepare and execute an optimal warehouse lighting plan.
To know what lighting the warehouse needs, let’s go over the common key features of warehouse. Then we can better understand the warehouse lighting requirements.
- 1,Warehouses include elevated shelves.
- 2,Warehouses have few windows.
- 3,Warehouses usually have wide and large floor surfaces.
- 4,Warehouses have high ceilings.
These key points are typically true for most warehouses, but just like people, warehouses can have their own unique differences.
So, here are 5 tips on warehouse lighting design
1, Figure out the best arrangement of lighting
When preparing your warehouse lighting plan take a moment or two to figure out if you can rearrange the warehouse’s contents in a more practical way. Different warehouse lights are intended for different parts of warehouses. Linear aisle lights, for example, are meant for low lighting over aisles. Panel high bays, on the other hand, are meant to single handedly cover larger areas than a regular UFO high bay light. So, are there ways to rearrange the contents of the warehouses so that it requires more practical, efficient and economical lighting.
Also, make sure to keep in mind that whatever arrangement you decide on is viable for the long term. Warehouse lighting is usually tricky to rearrange so if you swap some of the contents or design choices of the warehouse’s layout in a few months, then the recently-installed lighting will stop being as effective as it was at first. In other words, consider whether the warehouse layout you settle on will remain in such a state for a while.
2, Consider if there is anything unique about the warehouse
Are there more windows than the standard few? Can you use the combination of excess windows with fewer warehouse lights to your advantage? Is the ceiling lower or multileveled, allowing for fewer warehouse lights to cover larger cubic areas with light? There is much more to warehouse lighting than just slapping several UFO lights at equal intervals on the ceiling. The lighting should be customized based on the layout of the warehouse so that everything is lit in the best possible way. And you aren’t left with some lighter and some darker areas.
3, Choose the best type of warehouse lighting for the situation
There are 3 main types of warehouse lights : LED lights, fluorescent and HID (High-intensity discharge) bulbs. Each of them has its positives and negatives:
LED light is the most popular type of warehouse lighting nowadays. There are several reasons. Firstly, LED (light emitting diodes) is much more cost-efficient than HID and fluorescent because it consumes less energy. LED also offers warmth-free light that’s suitable for any situation regardless of what you’re storing. LED also has a significantly longer lifespan than other lights with good LED light fixtures reaching up to 50,000 hours of work life.
LED used to be more expensive than HID and fluorescent lighting but it isn’t anymore. One drawback of LED that still persists, however, is the fact that it produces a spotlight effect wherever they shine. Simply put, industrial LED lighting fixtures look like laser beams in that their light is very directional. This can be especially unpleasant in warehouses where workers might get blinded by looking into the LED light fixtures and get into unpleasant accidents.
This drawback of LED lights can be overcome, fortunately, by the use of reflectors. Some of the better warehouse LED lighting fixtures on the market are made in such a way as to reduce the glare of the LED lights and ensure a safer workplace. If you are interested in using LED high bay light to light the warehouse,you can click here.https://www.aisledlight.com/product-category/led-high-bay-light/
Fluorescent lights’ main advantage is precisely the key disadvantage of LED lights. They don’t produce glare. This makes them great for work environments such as warehouses, however, CFL has their own set of drawbacks. They are not as energy-efficient as LED lights, they have mercury running through them so disposing of them is much harder. And they produce a type of light that most people find less visually appealing than LED or HID lights. For these reasons, fluorescent lights have been slowly going out of style in recent years.
HID light bulbs used to be the traditional choices for both commercial and residential lighting for years before LED came around. They don’t produce as much glare as LED even though they too can be a bit hard on the eyes when looked at directly. HID fixtures typically use reflectors to better distribute the bulb’s light on the target area, so the exact design of the fixture is quite important for the overall effect. HID also have a significant amount of drawbacks that pulled them away from the top spot. They are less energy-efficient than LED and their light produces a fair bit of warmth which makes them impractical for a lot of warehouses that need to maintain low room temperature.
4, Choose the best long-term option
When design warehouse lighting, some people often underestimate the long-term cost of warehouse lighting. The fact of the matter is that the initial price of the lighting system purchase and installation will pale in comparison to the electricity bills you’ll have to pay in the next few years or decades. So, if you intend to use your warehouse for a long time, make sure that you choose the most energy-efficient option as long as don’t compromise other aspects of the warehouse lighting plan. As we can see,LED high bay lights can be the most energy-efficient lighting solutions for warehouse. Also there is motion sensor LED high bay light which can help us to save more.
Here is AIS motion sensor LED high bay light.
5, Consider the color of the light
Why you need to consider the color of the light for warehouse lighting design? The color of the light you’re using is important not just for aesthetical reasons but also because it affects things such as contrast and clarity. If workers are going to be walking around the warehouse, constantly reading labels, you’ll do well to give them the best possible reading light. The Colour Rendering Index (CRI) is the one to pay attention to in that regard. The higher the index, the better the light will be for reading. The CRI 80 is the minimum number you shouldn’t go below. Fortunately, for all the LED lights,the CRI is above 85 which will solve this problem.
About AIS :
AIS LED is a leading LED lighting supplier with innovative green technology. We are specialized in the manufacturing of innovative, next-generation LED lighting solutions such as E27/E40 LED corn bulb, LED street lights, PL G24 LED lights, PL G23 LED bulbs, portable LED work lights, LED Flood lights,R7S LED bulb, LED stadium lights and so on. AIS LED is committed to providing high-quality, sustainable, green lighting solutions to the world LED lights market.
